1 / 9
Woodturning lathe sanding pad holder adaptor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor for fixing a 14mm sanding pad holder to a 1" X 8 TPI woodturning lathe thread.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
This is an adaptor to enable a sanding pad holder to be used on a lathe. The lathe thread is 1" X 8 TPI with a standard 14mm angle grinder thread for the sanding pad holder.
This is NOT to be used with any angle grinder accessory or attachment. Just because you can does not mean you should.
Before first use run an angle grinder nut down the thread to clean it and ensure the print is good before using it with the sanding pad attachment.
Printed using PETG thread with 2mm walls and 50% infill.