1 / 9
Woodturning lathe sanding pad holder adaptor — image 1
1 / 9

Woodturning lathe sanding pad holder adaptor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adaptor for fixing a 14mm sanding pad holder to a 1" X 8 TPI woodturning lathe thread.

Rating
0 / 5
Likes
4
Downloads
39
Makes
0
Views
281
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This is an adaptor to enable a sanding pad holder to be used on a lathe. The lathe thread is 1" X 8 TPI with a standard 14mm angle grinder thread for the sanding pad holder.

This is NOT to be used with any angle grinder accessory or attachment. Just because you can does not mean you should.

Before first use run an angle grinder nut down the thread to clean it and ensure the print is good before using it with the sanding pad attachment.

Printed using PETG thread with 2mm walls and 50% infill.

Tags