Flashforge 5M side spool holder with roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Liked the side mount but wanted to use the roller.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 2027
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Liked the side mount but wanted to use the roller. Created a way to adapt it to the current side mounted options.
With my added walls, I was still able to print the mount in under an hour.
Requires 2 608 bearings to complete.
Print the roller vertically with supports on the bottom, print the holder on its side, and print the mount top down.
I got a tangle so I've included a rudimentary filament guide with the same mount plate.
I printed with 5 walls on the mount and used normal settings on the rest of the print. You may have to force the mount a little bit, but for me it went on with no problems.