Rotational Moment of Inertia Apparatus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotational Moment of Inertia Apparatus for Physics demonstration
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
Moment of Inertia Apparatus
First I have to thank then original designer “falconphysics” for the model my daughter found. She asked me to make for her to demonstrate for her Physics class. I only modified the design slightly and supplied a list of additional hardware to assemble the device.
Please refer to “falconphysics” link for any instructions on how to use the apparatus.
I also designed a spall threaded adapter to help center the Bearing on the ¼" threaded rod.
And a small printed String Washer to keep the thread from pulling out through the holes.
The Cap Rod Holder is for a 10mm vertical rod to place the apparatus on.
Each device you create will require 5 threaded rods, 4 to 16 ¼' Hex Nuts, String of equal length, up to 4 Ft. a varying number of Steel or Fender Washers as Weight, and a weights of equal size to pull the string.
Hardware Parts
- 8mm X 22mm X 7mm High Carbon Steel Z1 Bearings
- ¼"-20" x 6"-Inch Threaded Rod
- Steel Hex Nut ¼"-20" Thread Size
- Steel Flat Washer ¼" ID, 9/16" (Optional)
- Fender Washers, ¼" x 1" Inch
- Cotton Butchers Twine String or Kite String
