Rotational Moment of Inertia Apparatus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rotational Moment of Inertia Apparatus for Physics demonstration
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
Moment of Inertia Apparatus
First I have to thank then original designer “falconphysics” for the model my daughter found. She asked me to make for her to demonstrate for her Physics class. I only modified the design slightly and supplied a list of additional hardware to assemble the device.
Please refer to “falconphysics” link for any instructions on how to use the apparatus.
I also designed a spall threaded adapter to help center the Bearing on the ¼" threaded rod.
And a small printed String Washer to keep the thread from pulling out through the holes.
The Cap Rod Holder is for a 10mm vertical rod to place the apparatus on.
Each device you create will require 5 threaded rods, 4 to 16 ¼' Hex Nuts, String of equal length, up to 4 Ft. a varying number of Steel or Fender Washers as Weight, and a weights of equal size to pull the string.
Hardware Parts
- 8mm X 22mm X 7mm High Carbon Steel Z1 Bearings
- ¼"-20" x 6"-Inch Threaded Rod
- Steel Hex Nut ¼"-20" Thread Size
- Steel Flat Washer ¼" ID, 9/16" (Optional)
- Fender Washers, ¼" x 1" Inch
- Cotton Butchers Twine String or Kite String
