1 / 8
MODMIC WIRELESS BATTERY EXPANSION COVER
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade your Antlion ModMic Wireless with this oversize battery cover that supports up to a 600mAh LIPO 503040 battery.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 254
- Wydruki
- 6
- Wyświetlenia
- 1219
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 13)Remiksy (1)Kolekcje (20)Powiązane
Upgrade your Antlion ModMic Wireless with this oversize battery cover that supports up to a 600mAh LIPO 503040 battery. This is a simple and easy way to extend the battery life of your ModMic Wireless by up to 200%.
Spacer is to fille the gap between the battery and pcb
To install the Antlion ModMic Wireless Oversize Battery Cover:
- Remove the original battery cover and battery. Use a soldering iron to disconnect the battery from the PCB.
- Transfer the magnet from the original battery cover to the new oversize battery cover.
- Place the included spacer on the PCB. There should be enough adhesive left over from the battery removal to let it stick, but it's not crucial.
- Solder the new battery to the PCB, see photos for HOT and GROUND wire solder points.
- Install the new battery into the oversize battery cover and secure it with the original screws.