1 / 1
Mavic Pro Handle with print-in-place Latch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle to use for launching and landing/catching the DJI Mavic Pro drone from your hands / from the air.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Handle to use for launching and landing/catching the DJI Mavic Pro drone from your hands / from the air.
Snug fit around the drone, easy to mount and unmount. Robust assembly.
Printing
I am printing the handle upside down with the attaching surface and pins towards the print bed, using a 0.6mm nozzle. Material PETG. The bracket & latch I am printing flat, directly on the print bed. In various places, using the paint-on tool to avoid supports might make it easier to clean up the print.
Assembly
- After printing, carefully remove supports, then carefully wiggle the print-in-place latch open.
- Glue together handle and bracket, then
- from the inside of the bracket screw in a an M3 or M4 threaded screw to tighten the handle to the bottom of the bracket.