1 / 1
Mavic Pro Handle with print-in-place Latch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle to use for launching and landing/catching the DJI Mavic Pro drone from your hands / from the air.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 93
- Makes
- 0
- Views
- 464
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Handle to use for launching and landing/catching the DJI Mavic Pro drone from your hands / from the air.
Snug fit around the drone, easy to mount and unmount. Robust assembly.
Printing
I am printing the handle upside down with the attaching surface and pins towards the print bed, using a 0.6mm nozzle. Material PETG. The bracket & latch I am printing flat, directly on the print bed. In various places, using the paint-on tool to avoid supports might make it easier to clean up the print.
Assembly
- After printing, carefully remove supports, then carefully wiggle the print-in-place latch open.
- Glue together handle and bracket, then
- from the inside of the bracket screw in a an M3 or M4 threaded screw to tighten the handle to the bottom of the bracket.