detachable DeWalt Router circle jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Circle Jig for a DeWalt router (DCW600) -- but the circle jig detaches from the base via a thumbscrew
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 193
- Wydruki
- 2
- Wyświetlenia
- 1732
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is intended to work with M4 cap screws and M4 hex nuts.
The holes for the rods are 8mm diameter.
Designed in TinkerCAD – If you would like to modify anything about this design, please do!
https://www.tinkercad.com/things/1P1wi1dADdp-detachable-dewalt-router-circle-jig-v2
Printing Notes
- Overture PLA
- 0.4mm nozzle + 0.2mm layer height
- organic style supports
- 15% gyroid infill
Post-Printing
I had to do a bit of cleanup on the holes for the rods, as it was a very snug fit, but nothing a bit of sandpaper wrapped around a dowel couldn't fix.
The M4 hex nut on the underside of the base plate is friction fit, but you could probably use some glue if you're worried about it falling out.