1 / 4
Ender 3 V3 SE CR Touch Spacer for KE/K1 Hotend
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CR Touch Spacer for KE/K1 Hotend with volcano nozzle
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 545
- Wydruki
- 2
- Wyświetlenia
- 2886
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 7)Remiksy (0)Kolekcje (85)Powiązane
This is a CR Touch Spacer for the V3 KE/K1 Hotend installed in the V3 SE.
I based this spacer in the Volcano bracket by T3KPrinter as I did'nt think printing the whole bracket was necessary.
You will need two longer M3 screws as the originals won't reach through the spacer. I used 12mm but as you can see in the image, they are longer than necessary. 10mm would probably be fine.