Raspberry Pi Touchscreen case for prusa enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is made for a raspberry PI model 3b and 7'' touchscreen.
- Ocena
- 3 / 5
- Polubienia
- 23
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 2124
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a remix of the great design of E-Raw “Rasperry Pi 7” Touchscreen & Rpi 4B Enclosure mount" to fit my prusa enclosure.
My prusa enclosure is based on 2020 profile and 3mm panels. I would like something which can be fixed on top and tighten the panel as well.
I also modified the case to fit a raspberry PI Model 3.
I'll add a picture when everything will be mount on my enclosure.
Assembly instructions:
- Fix the Raspberry on the screen with the screws provided in the kit.
- Place the screen in the enclosure (orange part here).
- Place the Raspberry case.
- Insert 4 screws M3x35 DIN912
- Do not overnight the screws otherwise you'll have some marks on you screen.
- Finally fix the assembly with 2 screws M4x12 (DIN912) on the 2020 profile.
you're done!
Print instructions:
Files
You can use the 3MF Files or the presliced ones.
Material
I recommend printing both files from PETG.
Infill
20%
Recommended layer height
0.2 mm
Supports
Screen enclosure: Not needed
Enclosure Rpi Case: Mandatory
I would be very happy about a like or a rating if you like my project!
Feel free to take a look at my other designs!