Raspberry Pi Touchscreen case for prusa enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case is made for a raspberry PI model 3b and 7'' touchscreen.
- Rating
- 3 / 5
- Likes
- 23
- Downloads
- 104
- Makes
- 1
- Views
- 2,124
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I made a remix of the great design of E-Raw “Rasperry Pi 7” Touchscreen & Rpi 4B Enclosure mount" to fit my prusa enclosure.
My prusa enclosure is based on 2020 profile and 3mm panels. I would like something which can be fixed on top and tighten the panel as well.
I also modified the case to fit a raspberry PI Model 3.
I'll add a picture when everything will be mount on my enclosure.
Assembly instructions:
- Fix the Raspberry on the screen with the screws provided in the kit.
- Place the screen in the enclosure (orange part here).
- Place the Raspberry case.
- Insert 4 screws M3x35 DIN912
- Do not overnight the screws otherwise you'll have some marks on you screen.
- Finally fix the assembly with 2 screws M4x12 (DIN912) on the 2020 profile.
you're done!
Print instructions:
Files
You can use the 3MF Files or the presliced ones.
Material
I recommend printing both files from PETG.
Infill
20%
Recommended layer height
0.2 mm
Supports
Screen enclosure: Not needed
Enclosure Rpi Case: Mandatory
I would be very happy about a like or a rating if you like my project!
Feel free to take a look at my other designs!