Instax instant picture frame(Built in supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instax photo frame with built in supports and recessed slots for magnets in the back.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Instax picture frame I made for contest entry. It features four recessed slots in the back for 1mm thick magnets. My 8mm's fit snugly enough to not need glue but smaller diameters could be glued in place. The integral supports are easily removed with flush cutters. Some of the supports may print a little wonky as they are very thin but I added a redundant amount to make up for this and have yet to have any significant effect from a failed support.
Printed with eSun PLA+
.20 layer height, 3 walls(can print with 2 but supports get extra wonky), 10% grid infill. Should be printed standing straight up and a brim is pretty much mandatory.