Beamer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a cheap solution to mount my beamer. I decided to use Clamps. The beamer has moving parts and the resonances…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a cheap solution to mount my beamer.
I decided to use Clamps.
The beamer has moving parts and the resonances transmit to the clamped part. I didn't count for that, my bed is resonating the beamer fan which is unfortunate but I learned from it.
Other from that it works for my purpose.
- The hole for the beamermount strut/brace which gets injected is 6mm width and 29 in height.
- the rod is 10mm in diameter
- screw depends on your beamer model
*It is important that you dialed in your bridge settings for this print.
There is a bridge of 3cm.*
Please, if someone build this, tell me if it worked for you.
Uploading a picture would be very appreciated too.
sincerely.
Category: Office