Beamer Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a cheap solution to mount my beamer. I decided to use Clamps. The beamer has moving parts and the resonances…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 575
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a cheap solution to mount my beamer.
I decided to use Clamps.
The beamer has moving parts and the resonances transmit to the clamped part. I didn't count for that, my bed is resonating the beamer fan which is unfortunate but I learned from it.
Other from that it works for my purpose.
- The hole for the beamermount strut/brace which gets injected is 6mm width and 29 in height.
- the rod is 10mm in diameter
- screw depends on your beamer model
*It is important that you dialed in your bridge settings for this print.
There is a bridge of 3cm.*
Please, if someone build this, tell me if it worked for you.
Uploading a picture would be very appreciated too.
sincerely.
Category: Office