Pimoroni Trackball spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spacer for the Pimoroni Trackball. I used this to get my Lily58l (not every Lily58 can handle a pimoroni)…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a spacer for the Pimoroni Trackball.
I used this to get my Lily58l (not every Lily58 can handle a pimoroni) running.
The trackball has some components underneath, so it cant be soldered flush on any PCB.
I designed a spacer it can lay on.
There are two versions, one with through hole, one with the pins grabbing into the Pimoroni Trackball PCB.
Please! let me know if this works for you as it did for me, I did some slight change in height, after my last revision I personally printed and my printer is out of order right now so I can't check, but it 98% should work for you.
All the best.
Category: Electronics