Mechanical Keyboard Numpad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a standalone number pad that matches some of the other keyboards I have worked on.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 245
- Wydruki
- 4
- Wyświetlenia
- 2658
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a standalone number pad that matches some of the other keyboards I have worked on. This model was made from scratch but the original design was inspired by Thingiverse user Fumbucker.
The Numpad Body should work with the same USBC breakout boards that I have used in my other projects or something like a USBC Arduino Pro micro could be glued directly inside the case.
You will need:
1 - Arduino Development Board
17 - 1N4148 Diodes
17 - of your favorite mechanical keyboard switches
A compatible keycap set
3 - 2unit plate mount stabilizers
1 - USBC Breakout board (maybe)
2 - 12mm M3 bolts
2 - 20mm M3 bolts
4 - M3 nuts
Some wire and maybe some rubber feet for the bottom
3D PRINTING SETTINGS
Material: PLA
Infill: 20%
Layer Height: .2mm
Supports: No