Rogue Strix GD30ci Computer Case (Raspberry Pi 3b)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This file creates a replica of the Asus Rogue Strix GD30ci. It is set to hold a RasPi model 3b.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This file creates a replica of the Asus Rogue Strix GD30ci. It is set to hold a RasPi model 3b.
Main Tower: 135g if printed on its right side with normal support set everywhere.
Side Panel with Window: 20g if printed flat with normal support set everywhere.
Motherboard: 18g printed flat and no supports.
Shelf: 10g printed flat and no supports.
Front Panels (2): 43g if printed as is with support set everywhere/normal.
Total Material: 226 grams
Cut acrylic glass panel (2mm thick) to size and glue into "Side Panel w/ Window". size (84x77mm).
Purchase two 25mm led 5v fans from Amazon. Plug to GPIO pins outs on Pi Board. Research Pi Board GPIO pin out diagram on Google
for locations.
https://www.amazon.com/dp/B087Q8SDHB?ref=ppx_yo2ov_dt_b_product_details&th=1
Machine screws needed are M2.5. Kit can be found on Amazon. Comes in multiple lengths. Select as appropriate.
https://www.amazon.com/dp/B07CLQFQ4C?ref=ppx_yo2ov_dt_b_product_details&th=1
Raspberry Pi 3b and power cabel is needed to complete this project.