Rogue Strix GD30ci Computer Case (Raspberry Pi 3b)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This file creates a replica of the Asus Rogue Strix GD30ci. It is set to hold a RasPi model 3b.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 0
- Views
- 396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This file creates a replica of the Asus Rogue Strix GD30ci. It is set to hold a RasPi model 3b.
Main Tower: 135g if printed on its right side with normal support set everywhere.
Side Panel with Window: 20g if printed flat with normal support set everywhere.
Motherboard: 18g printed flat and no supports.
Shelf: 10g printed flat and no supports.
Front Panels (2): 43g if printed as is with support set everywhere/normal.
Total Material: 226 grams
Cut acrylic glass panel (2mm thick) to size and glue into "Side Panel w/ Window". size (84x77mm).
Purchase two 25mm led 5v fans from Amazon. Plug to GPIO pins outs on Pi Board. Research Pi Board GPIO pin out diagram on Google
for locations.
https://www.amazon.com/dp/B087Q8SDHB?ref=ppx_yo2ov_dt_b_product_details&th=1
Machine screws needed are M2.5. Kit can be found on Amazon. Comes in multiple lengths. Select as appropriate.
https://www.amazon.com/dp/B07CLQFQ4C?ref=ppx_yo2ov_dt_b_product_details&th=1
Raspberry Pi 3b and power cabel is needed to complete this project.