Counting matching models…
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
This stand will hold your Ally / Ally X (or possibly Steam Deck / MSI Claw / Lenovo Legion Go - untested) at 20deg from vertical for easy viewing, while also supporting a USB hub so that it's not pulling on (and potentially eventually…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Print Duration: 1h 45m 2s Dimensions: a. Model Dimensions Slot Height: 18.8mm Top…
The fans work well with 5v usb ports and reduce CPU temperature from 98c to 60c but quite noisy. I print this with PETG and the 2 holes on the top turned out not good (without support). If you want to print without support, rotate 90…
Part for repairing Asus ROG Delta headphones. In the stock version, the headphones have a plastic wire terminal that does not limit bends and the wire eventually fails. With this model I was able to repair my headphones. There are 2…
A remix of @Czario_2210257 model for a "cleaner" look for my own preferences. Set Z-axis to 3.81mm before printing
Transporting your case with such a big graphics card may be dangerous. With that part, you can safely retain it. Also, without it it likely won't stay straight: Instructions The small standoffs for the riser cable must be raised a little…
The stick attaches to the adapter using magnets and friction. All you need are two 4x2mm magnets, which you glue on with superglue. The adapter is designed for first-generation Xbox Elite sticks, not second-generation ones.
The wood strips are 275x10 mm with a max thickness of 13.5mm. They are made to be slid in from the back and glued. Printed at 0.08MM layer height to mitigate drooping on the overhang (made to match the stock panel) (I laser cut the strips…
Lost some of my rubber feet so I decided to print new ones. Mine are in 95A TPU and are not very grippy so something softer would work best. But it's much better than missing feet.
This model is designed for the ASUS N100I-D mainboard inside the Jonsbo N2 case. It mounts directly onto the CPU heatsink and allows you to attach an additional 120mm fan. It's is also compatible with…
Lets you mount an ASUS ROG PG279Q power supply underneath your desk with a single large Command Strip.
How I print? I printed this on PETG, because I wanted something stronger to hold on my router while hanging on the wall. I printed on standard resolution (0.20mm) and I enabled support. I print it laying on the bed on the back (longer…
One of the fans on my graphics card gave out, so I set out to design a custom shroud that can hold 120 mm Noctua Chromax Black fans, and it should work just as well with 120 mm Be Quiet fans. The shroud mounts directly onto the cooler…
I made this model very quickly to be able to attach my camera to my monitor's stand. Next to the 3D-printed part I used the top of a cheap lighting stand that broke, which is to be inserted into the tube at the top. You can then put a…
Slide in stands for the Asus ZenScreen MB16 Monitor. Modeled for and tested on MB16AC but I bet they work for MB16ACR and MB16ACM. There's 2 model on more "upright" and one more "inclined" and for each there're models that take 10mm…
Stand for the WiFi/Bluetooth antenna of the ASUS X570-E Gaming motherboard. The original stand is very unstable, so I redesigned it. Printed with 0.08 mm layer height for a better finish.
I received an old Asus laptop that broke at the hinges as the piece sheared off but the wiring was still connected. It was a perfectly functioning laptop but the hinge just couldn't move without risk of further damage. I constructed a…
Xbox Ally X belly stand. I personally printed it with supports, just in case.
A small chibi pegasus 3D print with folded wings and an oversized head, printed in one color filament. Visible layer lines and slight texture imperfections show a real FDM print. The model is placed on a tabletop with everyday items…
Original modified to add support and embossed the model name. Otherwise the design stayed the same. I just grabbed the bottom section and pasted it in a number of times to extend it. Modifications here on Tinkercad:…
A stylish Pegasus (winged horse) figurine for fantasy displays, dioramas, or tabletop scenes.
A convenient, adjustable holder designed for use with a keyboard and mouse. Aluminum tube (or iron) of any length, 20x20mm. M4 bolt and nut, 40mm. If the bend of the fastener is not correct, you can heat it with a lighter and bend it The…
Bring myth and majesty to your collection with this Winged Unicorn Pegasus , a beautifully sculpted fantasy creature that blends elegance, strength, and celestial presence. Featuring a powerful equine form, expansive feathered wings, and…
Hinged wall mount for Asus ZenWiFi AX Hybrid XP4. Designed for easy port access without unmounting. The clamp collar ensures a secure fit around the device's unique profile. Tested for over two years, before publishing here. The model…
Asus ROG - AORUS Gigabyte Keychain - Alienware Dell - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you…
Description Wore your Keyboard Arrow Keys out yet? Asus ROG Keyboards are very expensive and I have found a way to give new life to my keyboard with broken arrow keys! I designed a snug fitting replacement arrow key set for my ASUS ROG…
Simple Clamp for an ASUS Bezel Free Kit to get an tension connection between both Holders. This helps a lot for better grip, especially with Curved Screens. As towing cable i used Filament. I uploaded two Versions. One Clamp is for the…
For what ever reason when I made the file and outputted to stl it was miniature. when printing you'll need to scale up the file by 100,000%
Vertically mount a Pegasus power box to Askar dovetail plate to the side of the OTA. Use M6 screws and nuts of appropriate length to attach it to the dovetail plate.
The armrest for my Rog Destrier just broke, and before throwing away the chair, I decided to replace the armrests by recreating them from scratch. So you need to keep the plastic from where the foam pad is attached to it to the original…
Should work for both the MINI and MINI OC variant since they are identical in size. BOM: 4x M3 Screws (5.5mm minimum) 4x M3 Nut
IO shield for an Asus P8H77-I Mini ITX Motherboard. If you encounter any issues comment and ill try my best to fix it asap
support de casque très pratique a imprimer en PLA a 15% de remplissage
List of parts: 2 92x25mm fans cable adapter PH2.0 to 2x 4pin 10 M5 fan screws 4 M3 screws 4 M3*4*(4,5-5) heat-insert nuts 2026-04-26: Update model and add sources (Kompas 3D)…
A wall mount for an ASUS ZenWiFi AC Mini (CD6). The wall mount also has spaces to attach screws to mount a TP-Link LS1005G 5-Port Desktop/Wallmount Gigabit Ethernet Switch.
A nice wall mount for your home ASUS Ascent GX10 LLM server. This mounting bracket can be mounted sideways and top down depending on your needs. There are little nodges for the feet so the GX10 will not slide out.
This is Pegasus with wings. Printed with 100% infill to make it solid. I have increased the base height to compensate for the weight on the model. Settings for supports are Normal, Grid, 12, Build plate only, Remove small overhangs…
Hey my 3D-Friends! I have designed a easy wall mount for these ASUS-Routers: ASUS RT-BE96U ASUS ROG RAPTURE GT-BE98 ASUS ROG RAPTURE GT-BE98 PRO ASUS ROG RAPTURE GT-BE25000 ASUS ROG RAPTURE GT-BE19000 ASUS ROG RAPTURE GT-BE19000AI Here…
Remix of Thorvalls Dimm.2 fan mount for the never Dimm.2 H5 Gen4 with the standoffs allready on the board. Adds also space for surface mount components that they dont touch the print. Print with petg the ssd:s and the surfacemount parts…
asist blade para los blades con la alineación de dran brave para el upper atack
I created this model usiing a plank template. On the second attempt i got into the holes under the audio.
Really liked the 2 keystone model of 10 inch rackmount - ASUS NUC 14 Essential (Updated!) , but the USB logo above the keystone holes was bugging me. I want to put HDMI and Network keystones there, so it didn't make sense. This is me just…
Printed with 0.16mm layer height. The hinges have a clearens of 0.3 to 0.4 mm, if they are still squeaking you can use penetrating oil, it helps a lot! Also, when slicing the model, make sure that the seam dosent glue the hinge parts…
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
A simple stand for the ASUS NUC 16 that does two quiet, useful things: it opens up the bottom of the chassis for airflow, and it lifts the whole unit about a centimeter off the desk. That little bit of lift is the part I actually designed…
Printed in PETG. Use long 2m screws and 1mm thick double sided tape on the squares to provide the support necessary for it to stay in place. A printer with at least 170x170 bed area is required.
Quick edit, it holds the laptop upside down but its a secure fit and a quick print. Should work with any filament, print vertically(the long way)
Con la necessità di fissare il PC ASUS Eee Box sotto al mobile ho realizzato questi 4 semplici supporti da fissare con viti Category: Computer
Just print 4 of the feet for you Leifheit Pegasus 150/180/200 and clip them to the stand. Printed in standard Prusa Slicer settings in PLA. No supports needed.
Since the original Asus Rog Ally stand is a piece of paper that actually blocks part of the screen, I decided to create my own version, much easier to use, more robust and that doesn't touch the screen at all. Choose your version: 1) With…
Protection for factory laptop legs, ideal for those whose factory legs have worn out.
Low profile wall mount for the Asus RT-AX88U. Pegs slide and lock into the keyholes with ease. Should work for anything with mounting holes that are 8 5/8in or 218mm apart (From center to center) Thanks feddas , didn't have to measure a…
Case for ASUS power supply model A15-120P1A Τo place the power supply on the sides of your desk 7-our printing Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 200 Infill: 10 **Filament:**…
This is a bookmark with my Civil Air Patrol squadron's number on it.
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results, your minimum layer height can be 0.06mm or less.
Belt clip for Asus GT301 case for people like me. I broke my, when trying to get the front panel of and said to myself, that i could not be the only one. HUGE PRINT TIP: Print on side, helps structural integrity and doesn't need supports
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
Head Phone holder that slides onto the upper rail of Asus ROG Strix Helios GX601 PC case.
I wanted to mount the router to the wall but there was no accessory for the wall mount of the router. So, I've made one for myself, it was important for me to have a stable and durable stand. The model consists of 2 pieces. The main piece…
Clip-on Grips / stand for Asus ROG Ally. I found the options available made me reach for the ABXY buttons, leading to hand fatigue pretty quick, so I designed these to mimic other controllers. Truth be told, the Ally is a bit heavier than…
Remixed my Model to fit the Power Supply of the Pegasus Advance, since it has bigger dimensions due to user request
Oryginalna obudowa Asus Prime AP201 (obojętnie która wersja - ze szkłem, siatką, czarna, biała) ma nóżki od dołu 25mm wysokie. Stawiając taką obudowę np na dywanie - nie ma jak ciągnąć powietrza od dołu, a na pewno działa jak odkurzacz i…
Hey my 3D-Friends! I have designed a easy wall mount for these ASUS-Routers: - ROG RAPTURE GT-AXE11000 - ROG RAPTURE GT-AXE16000 - ROG RAPTURE GT-AX11000 PRO Here you can get the free template to print it first for testing. The template…
An assorted group of keycaps. You have to print and decide which works better for your machine, but as always, I recommend the latest version. Print at the highest tolerances possible, as the keycap feet are rather small and need high…
I wanted a tray for the ASUS MOCA adaptor . I started with the Raspberry Pi simple tray and using tinkercad I created a stand-in for the ASUS. I then used this to adapt the simple tray.
designed to print on mini, use ABS, ASA, PETG or PLA with top 2 layers in red and remainder in white on body sections and first and last 2 layers in red on wings. 28 Dec 2021 update - fixed holes in left side Jan 2025 update - added…
ASUSTOR AS5304T Vibration Dampening Feet These are vibration dampening feet for the ASUSTOR AS5304T NAS, that are printed in two parts using flexible filament. While the AS5304T NAS from ASUSTOR is a relatively quiet NAS when it comes to…
Same as the version for G14 but compatible with G15 (or possibly any laptop with the similar proportions). I decided to print the stand 20mm thick for more robustness so i added modified version of the connector. Since making the stand…
Files: v3 is for bricks that are 7.5cm x 7.5 cm and older. It has only one lip, because I'm to lazy to backport the second lip to the old version. v4 is for bricks that are 6.5cm x 6.5 cm and newer. It has two lips. The fit is a bit…
Asus RT-AX82U support for honeycomb Note: It is honeycomb wall is 90° rotated.
wall mount for model ASUS ZenWiFi BQ16 24-10-2025 Now with a high model
Had a request to use my ASUS brick holder under a desk. Quickly drew up a new version that should suit that request much better. Print two on their sides, give it 6 walls at standard 0.4mm thickness and it should be solid. Probably fine…
Experience the power of the Pegasus XL with this 1:578 scale model of the world’s first privately developed space launch vehicle! Designed for air-launch from a high-altitude carrier aircraft, the Pegasus XL rocket can reach orbit,…
Info Had a couple ASUS Chromebox 3 and wanted to use them as a home lab server but didn't have a good way to stack them. This model is what I came up with. Footprint is 164x164mm (outer, 154 inner) with 4mm thick bottoms Models included:…
Couldn't find one which fit the 240EB so here's a quick and dirty one. Friction fits close enough to stay in place and only contacts the printed part in small areas too keep cooling from being impaired. Use something other than PLA since…
A simple cable management solution designed for the Asus 65W charger . While similar models exist for Apple chargers, I took inspiration from this one to create one tailored for Asus, as no such option was available.
It's an amateur render of the small clip holding the side of the ASUS AP201.
Custom Monitor Support: Designed for Stability and Perfect Alignment I designed this custom support system to overcome the limitations of the original ASUS stand, which is designed for 27-inch monitors. My setup features three 32-inch…
Vymodeloval jsem chránič kabelu pro nabíječku notebooku ASUS. Jen se nacvakne na koncovku a kabel. Tiskl jsem vrstvou 0.2mm při 100% výplni a s brimem na stojato.
iPhone holder for continuity camera specifically made for monitor ASUS VG32UQA1A. probably fits other Asus monitors but not tested
Layer height of 0.20mm Plate with Asus ROG 140mm x 120mm Designed for single color printer with the support to be printed separately and then glued. If you want to make the seal another color, pause the printer at layer 21.
This is a laptop stand for the Asus Rog Strix G513GU. Im sure it should fit other rog strix models. 4 piece.
This is a mount for holding an Asus ZenWifi AX on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. There are also countersunk…
Christmas tree ornament inspired by "The Pegasus". Print each half (works best on a resin machine), then cut a length of ribbon, knot together and feed the loop through the half with the hole. Glue together, and paint it up!
This stand will hold your Ally / Ally X (or possibly Steam Deck / MSI Claw / Lenovo Legion Go - untested) at 20deg from vertical for easy viewing, while also supporting a USB hub so that it's not pulling on (and potentially eventually…
This is a DDR RAM slot clip specifically designed for the ASUS P4P800 motherboard. I got this board for a vintage gaming build but it had a missing clip on the of the RAM slots. I have also included the CAD file so this can be modified…
1:1 of the ASUS ROG STRIX B360-I GAMING mini-ITX Motherboard.
Amazon product ID was B08F9X1Q4J with the godawful title of “Delippo 240W 20V 12A Laptop Ac Adapter for ASUS ADP-240EB B Rog Zephyrus Duo 15 GX550LXS RTX2080 rog GX550LWS-HC099T i7-10875H rtx2070” It's almost certainly a re-badge of…
