Face with Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge painting with an Ai picture i made
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 395
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Made a picture of a face as painted with thick paint strokes with Ai, and changed it a bit with Photoshop Elements. I think it turned out pretty cool as a painting with Hueforge.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA COPYMASTER Black Transmission Distance: 1.3
PLA CLASOHLSON ORANGE Transmission Distance: 11
PLA COPYMASTER DARK GREY Transmission Distance: 1.5
PLA COPYMASTER LIGHT GREY Transmission Distance: 1.8
PLA R3D White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to ORANGE
At layer #12 (1.04mm) swap to DARK GREY
At layer #15 (1.28mm) swap to LIGHT GREY
At layer #17 (1.44mm) swap to White for the rest.