Filament Dust Filter with Spring Clip + Improved Grip + Snap-fit Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Dust Filter with Spring Clip with ridges for grip and snap-fit hinge
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Filament Dust Filter with Spring Clip with ridges for grip and updated to not using piece of filament for hinge and using a snap-fit hinge instead.
Be aware of tolerances. There's a looser one that I've also included (DustFilterClip - Looser.stl).
Print settings:
Print without supports and default orientation. Printed in generic PETG on MK4 default 0.2 STRUCTURAL IS profile.
Construction:
I recommend aligning both halves with top and bottom together and pushing both sides together. It will take some force to push both halves together. A small spring is required for the spring action. I cut a piece pen spring to length and used a pair of pliers to compress the sprint and inserted it into position.