Filament Dust Filter with Spring Clip + Improved Grip + Snap-fit Hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament Dust Filter with Spring Clip with ridges for grip and snap-fit hinge
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 1
- Views
- 381
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Filament Dust Filter with Spring Clip with ridges for grip and updated to not using piece of filament for hinge and using a snap-fit hinge instead.
Be aware of tolerances. There's a looser one that I've also included (DustFilterClip - Looser.stl).
Print settings:
Print without supports and default orientation. Printed in generic PETG on MK4 default 0.2 STRUCTURAL IS profile.
Construction:
I recommend aligning both halves with top and bottom together and pushing both sides together. It will take some force to push both halves together. A small spring is required for the spring action. I cut a piece pen spring to length and used a pair of pliers to compress the sprint and inserted it into position.