CYOA (Choose Your Own Adventure) Ortho Keyboard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray style cases for the CYOA Ortho DIY keyboard where you snap off rows and/or columns to make your perfect board!
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 873
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
CYOA Ortho or Choose Your Own Adventure Ortho is a simple Pro Micro compatible ortho PCB that you can freely adjust to your preferences by snapping off rows or columns to make your perfect size board.
Find out more about CYOA Ortho here: https://github.com/mohoyt/cyoa_ortho or buy some PCBs here: https://sthlmkb.com/shop/cyoa-ortho/
Anything from a 3x3 to 5x12 (row x column) is possible. These are tray mount style cases for almost every size of this keyboard.
I used supports when printing this due to the hole for the USB port, but it might be possible without. I printed one case in Red/Blue Silk PLA from 3DJake and a smaller case from black Prusament PLA and they both looked great!
For assembly you will need some M2 heat set inserts for mounting. These, once installed, should be flush with the top of the standoffs. There are also M4 holes in the base to be used with cone feet (available here: https://www.printables.com/model/764865-keyboard-cone-feet ), or alternatively you can place rubber bumper stickers in the recesses on the base of the board instead (if you don't want as aggressive a typing angle).
There is a slight recess in the base for the microcontroller. In order for the PCB to fit in the case correctly, the microcontroller has to be as close to the PCB as possible, so bear this in mind when soldering.