Yakima JetStream Roof Rack End Cap Replacements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement end caps for the Yakima JetStream Roof Rack
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that fit snugly within the roof rack ends. The caps are about 10mm thinner and without the unique design, but nearly matches the roof rack flawlessly.
No hardware is required to install, and if you lose them again - just print another one (or set)! Would recommend printing PETG or ASA due to constant UV exposure. Supports will be needed on the inside “button” due to printing face down.