Periodic Table Refrigerator Magnets (118 Elements and a few more)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
60mm X 60mm X 3.6mm element tiles. Each has two holes on the back to hold 6 mm magnets.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
60 mm square “refrigerator” magnets of the elements, designed to be used with two 6mm X 2mm magnets, though magnetic tape strips, double stick tape, and removable adhesive strips will work well enough. Works best if printed in two colors. Includes some elements from another universe*.
I used a 0.4 mm nozzle, 0.2mm layer height, 3 walls, 15% infill, PLA filament from Overture, Bambu Labs, Sunlu. These were created using the Make My Sign gadget on Makerworld.com. To get the right color effect, set a filament swap in your slicer at 3.2mm (See the screenshot).
Magnets fit is tight, I forced into place with a couple hammer taps. May want to use a drop of superglue, depending on how much the tolerances on your printer work out.
I used these magnets from Amazon in the US.