MultiBoard Glasses Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shelf is for glasses/sunglasses that can be mounted on the standard multi-board.
- Ocena
- 4,667 / 5
- Polubienia
- 126
- Pobrania
- 774
- Wydruki
- 4
- Wyświetlenia
- 2377
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a basic glasses mount that can be attached to any standard format MultiBoard. It does fit standard glasses along with my oversized aviators.
This is a remix of the original Idea made by @Sparks3D.
Print as is in the file with the bottom sitting flat on the plate. Supports are needed for the rear MultiBoard Mounts only. I used Tree Auto (Tree Hybrid) with a 25% threshold angle.
Printed on X1C using .16 mm Layer height with 15% infill. May want a little more depending on the weight of your glasses but the Multiboard mount is very tight and doesn't move when installed. No other hardware is needed. Push fit.
Timelapse Link -