Creality K1 adjustable feet/ legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corrected several issues from the original design.
- Ocena
- 4,857 / 5
- Polubienia
- 84
- Pobrania
- 519
- Wydruki
- 8
- Wyświetlenia
- 2345
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can download 2 versions, one with an additional thread tolerance of 0.1 and one with 0.2 mm. I printed both versions, in PLA, with a layer of 0.1 height.
I decided to keep the 0.1 without any mechanical adjustments.
The 0.2 tolerance might be a better fit if you decide to print in 0.2 layer height and PETG (I expect more friction). In both versions you will find a small play between parts when holding in your hands, but this is canceled when installing on the printer due to the weight.
The cap is not mandatory to print for the functionality of the assembly, it's purpose is only to hold the original rubber feet into place, to not fall when moving the printer.