#0129 Flexible Fabric Tape Winder (Spooler) [new sizes added]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your fabric tape rolled up and ready to use without the tangled mess!
- Ocena
- 4,917 / 5
- Polubienia
- 152
- Pobrania
- 480
- Wydruki
- 12
- Wyświetlenia
- 1690
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!

**********
[UPDATED April 20 2023] Other variants are published below:
- Winder with Lightning Pattern here.
- Winder with Diamond Pattern here.
- Winder with Spiral Pattern here.
**********
[UPDATED Mar 24, 2024]: New sizes added!
Size | Tape Width (mm) | Length (cm/inches) | Thickness (mm) | Metal Tab Length (mm) |
|---|---|---|---|---|
| 18-150 | 16-18 | 150/60 | 0.50 | 12 |
| 18-300 | 16-18 | 300/120 | 0.50 | 12 |
| 20-300 | 18-20 | 300/120 | 0.50 | 12 |
* Can print faster with input shaper.
Each size comes with 2 versions of lids.
REMINDER: For smoothest operation, apply some paraffin wax to the rim of the body, then assemble and spin things a few times to distribute the wax. If you don't have paraffin wax, you can use color-matched crayons or wax from a tealight candle!
**********
Unlike many of the ones I've seen of a flexible tape housing so far, this one prints easily, with NO supports needed, and NO hardware required to put it together. ONLY 2 parts that snap together, that's it! Works smoothly and hassle-free!
What it fits:
Size | Tape Width (mm) | Length (cm/inches) | Thickness (mm) | Metal Tab Length (mm) |
|---|---|---|---|---|
| 15-150 | 12-15 | 150/60 | 0.45 | 11 |
* Can print faster with input shaper.
You are welcome to DM me if you want a version that fits something different than these dimensions.
Features:
- Easy assembly! Snap it on and snap it off - no tools required.
- 2 parts print in about 1.5 hrs.
- Arrow on the outside indicates which direction to turn.

- Arrow on the inside indicates where to slide in the tape end.

- The tail end of the tape is locked in place.
- Prints without supports.
2 Versions of the Cap are provided:
- Arrow Style 1 - conventional
- Arrow Style 2 - triangles
Useful TIPS:
- If you like the colors shown in the pics, I used a tri-color filament and the bottom layer set to Hilbert Curve. This really accentuates the color transitions and creates a unique colorful part - both fun and functional! :-)
- PLA works fine for this application.
- Make sure your printer has the extrusion multiplier correctly calibrated. If the nozzle over extrudes, it will likely the lid not to spin freely.
- If you encounter the above issue, you can easily adjust down the extrusion multiplier around 0.5-1% to eliminate the binding.
- For smoothest operation (not required), apply some paraffin wax to the rim of the body, then assemble and spin things a few times to distribute the wax.
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D Also, please mention which version of the lid you like better!
Happy Printing!
P.S. Please post some constructive feedback if you'd like to see something improved.