1 / 13
#0129 Flexible Fabric Tape Winder (Spooler) [new sizes added] — image 1
1 / 13

#0129 Flexible Fabric Tape Winder (Spooler) [new sizes added]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keeps your fabric tape rolled up and ready to use without the tangled mess!

Rating
4.917 / 5
Likes
152
Downloads
480
Makes
12
Views
1,690
Reviews
12

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like! 

**********

[UPDATED April 20 2023] Other variants are published below:

  1. Winder with Lightning Pattern here.
  2. Winder with Diamond Pattern here.
  3. Winder with Spiral Pattern here.

**********

[UPDATED Mar 24, 2024]: New sizes added!

Size
Tape Width (mm)
Length (cm/inches)
Thickness (mm)
Metal Tab Length (mm)
18-15016-18150/600.5012
18-30016-18300/1200.5012
20-30018-20300/1200.5012

* Can print faster with input shaper.

Each size comes with 2 versions of lids.

REMINDER: For smoothest operation, apply some paraffin wax to the rim of the body, then assemble and spin things a few times to distribute the wax.  If you don't have paraffin wax, you can use color-matched crayons or wax from a tealight candle!

**********

Unlike many of the ones I've seen of a flexible tape housing so far, this one prints easily, with NO supports needed, and NO hardware required to put it together.  ONLY 2 parts that snap together, that's it!  Works smoothly and hassle-free!

What it fits:

Size
Tape Width (mm)
Length (cm/inches)
Thickness (mm)
Metal Tab Length (mm)
15-15012-15150/600.4511

* Can print faster with input shaper.

You are welcome to DM me if you want a version that fits something different than these dimensions.

Features:

  1. Easy assembly!  Snap it on and snap it off - no tools required.
  2. 2 parts print in about 1.5 hrs.
  3. Arrow on the outside indicates which direction to turn.


     
  4. Arrow on the inside indicates where to slide in the tape end.


     
  5. The tail end of the tape is locked in place.
  6. Prints without supports.

2 Versions of the Cap are provided:

  1. Arrow Style 1 - conventional
  2. Arrow Style 2 - triangles

Useful TIPS:

  1. If you like the colors shown in the pics, I used a tri-color filament and the bottom layer set to Hilbert Curve.  This really accentuates the color transitions and creates a unique colorful part - both fun and functional! :-)
  2. PLA works fine for this application.
  3. Make sure your printer has the extrusion multiplier correctly calibrated.  If the nozzle over extrudes, it will likely the lid not to spin freely.
  4. If you encounter the above issue, you can easily adjust down the extrusion multiplier around 0.5-1% to eliminate the binding.
  5. For smoothest operation (not required), apply some paraffin wax to the rim of the body, then assemble and spin things a few times to distribute the wax.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D  Also, please mention which version of the lid you like better!

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.

Tags