#0127 Thermocouple Protective Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We use many of these expensive thermocouples at work and often damage or get them tangled; this case stores them neatly.
- Ocena
- 4,667 / 5
- Polubienia
- 13
- Pobrania
- 61
- Wydruki
- 3
- Wyświetlenia
- 353
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!
**********
Designed and tested to fit the common Type K thermocouples from Omega, but may fit other types as well that are 1 - 1.25mm in diameter.
These thermocouples are expensive but get damaged quite easily and/or easily become a tangled spaghetti mess which is time consuming to undo! This case keeps them stored neatly and safely so they don't get tangled or break.
Features:
- Small and round that allows the thermocouple wiring to be wound neatly.
- Has a contact holster to park the plug end, then wind the rest of the wiring neatly.
- Designed to fit wire diameters 1 - 1.25mm.
- Has friction-fit “fingers” at multiple locations to hold the delicate sensor end.
- The cover rotates to a target point that marks where to open.
- The cover rotates to a locked position, where it “clicks” in place.
Printing Recommendations:
- Use the .3mf with painted seams for best results.
- 0.2mm layer and 0.4mm nozzle, 15-20% infill.
- No supports needed.
*** ATTENTION ***
The reel cover and reel body are designed to have a 0.2mm total gap fitment. For a well-tuned printer, this should work.
However, when I printed on the factory assembled MK4 with Input Shaper on the Structural speed setting, the parts came out with more “play” than desired - just a bit too loose, so I increased the Extrusion Multiplier to 1.015 (+1.5%), and it fits perfectly! Your results may vary - so please experiment for the best fit with your printer.
NOTE: I'm not expecting too many downloads of this model, because it's rather technical in nature, but thought I'd share it anyway. Cheers :-)
**********
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!
P.S. Please post some constructive feedback if you'd like to see something improved.