Simple Filament Samples for PLA, PETG, ABS & TPU with temperature marks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: Added samples for TPU Just some simple samples for PLA, PETG & ABS. I also created a second set with marks on…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 170
- Wydruki
- 2
- Wyświetlenia
- 486
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Update: Added samples for TPU
Just some simple samples for PLA, PETG & ABS. I also created a second set with marks on the side to make notes about optimal printing temperature using a thin marker.
Left side is to note down temperature in 100°C steps, right side for 10°C steps.
Optional to a marker you could also cut out the top and/or bottom parts of the marks.
As the markers require special print settings, i created some easier to print rectangel ones you can find here: https://www.thingiverse.com/thing:4372549
If you want more materials added, just leave a comment.
Thingiverse sometimes upscales smaller things automatically, so you might need to reduce the size of the downloaded files to 10%.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2 (0.1 recommended)
Infill:
100%
Notes:
IMPORTANT: Make sure you have external perimeters set to 0.25mm or less or you won't get segments at the 10°C steps!!! Check on your slicer before printing!
Category: 3D Printer Accessories