1 / 5
Geometric basalt columns for aquarium/fish tank
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a fake rock cave for cool aquarium or else!
- Ocena
- 5 / 5
- Polubienia
- 729
- Pobrania
- 1128
- Wydruki
- 0
- Wyświetlenia
- 16 242
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (23)Wydruki i komentarze (Wydruki: 0) (Komentarze: 15)Remiksy (0)Kolekcje (699)Powiązane
Designed for 30 x 30 x 35cm fish tank, but you can always modify it!
It is inspired from basalt columns around the world.
The top part can hold a plants, bottom one can hold a 1~2L of filter media and 2 inches/5cm wide water pump!
You will need a soldering iron to melt and stick the parts together.
Other method like superglue, tape will works too :)
I made a few holes at inside walls, so water flows well!
Edit: I applied fuzzy skin to my print. Forgot to mention it…
File description
- geometric columns(Main files)
- Basically the parts from the ‘Separated parts’ below. .3mf file contains multiple objects.
- without_holes version does not have a water flow holes.
- .f3d files
- So you can modify it!
- Separated parts
- I printed with this one. It have a few water flow holes at side!
- Solid
- It's not hollow. So you could easily change the size and perimeters.
- Also have separated version for small printers.