Dyson v15 Trigger lock (yes, another one)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Dyson v15/v10/v11 trigger lock with enough room to still use the trigger and one handed operation
- Ocena
- 5 / 5
- Polubienia
- 125
- Pobrania
- 769
- Wydruki
- 25
- Wyświetlenia
- 4617
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Like Rilot's design, this model attaches to the lip below the trigger but leaves much more space for normal trigger operation.
The lock can be flipped using a single finger allowing for one-handed operation and you can easily switch between locked and unlocked state.
The print does require some supports for where the bolt heads end up. Orientation should be so that the opening for the lip is up. I printed it in PETG with 0.2mm layer height.
Mounting requires 1x M3 20mm and 2x M3 12mm bolts.
I only tested this on a v15 but as the model is based on one for v11/v10, I assume it will also work for those.