Liczymy pasujące modele…
My take on the Dyson accessory holder, as I had trouble with alternatives being incompatible with the powered accessories of the v15. Designed to be printed without supports. Should be a tight snap fit, but you might want to scale it up…
A simple yet clean solution to store the multiple attachments you can use with a Dyson vacuum. Works for the small attachments up to the large mopping ones. Attaches to the wall with 2 screws. This mount allows you to snap in the…
it has a mechanism to secure to ratcheting gear and to release the gear to unwind. no supports
This is an update/alternative to my previous model . After some use, I redesigned the model to make installation significantly easier, more precise, and aesthetically pleasing. The model can be installed by pressing it onto the filter or…
MUST PRINT WITH TPU. I don't think any other material would flex enough to let you actually mount this to the vacuum. These pieces that allow you to attach a shoulder strap to a Dyson v15. You should use it in conjunction with one of the…
Sturdy Dyson V12-V15 wall mounted toolholder. This will hold the the newer styled accessories/tools with the angled mating face. It will hold electrically powered accessories/tools as wel (except the v15) ) as all the non powered…
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
Dyson V10 Motorized Brush Endcap Replacement Compatible with Part Number: 967483-01 This design includes two variations: Gasket-Required Version : A version designed to accommodate a gasket, matching the original specifications.…
With this holder I can store my submarine unit on the wall along with the other nozzles. you need a left and a right, so mirror the one piece in your slicer when you want to print the second part.
Wand Tube/Cleaner Head Clip Latch Tab Button – Compatible with Dyson V7, V8, V10, V11, and V15 Vacuum Cleaners Replacement Part : Perfect for replacing a broken or worn-out latch tab button on your Dyson wand or illumination tool.…
This is remix originally by RoboCop0815 ( https://www.thingiverse.com/thing:4441407 ) Improved trigger via handle. For left handed or right handed - your choice :-) Use PETG if you want it stronger. How it works: Standard print settings:…
Remix of japonicki's Boruit V20 flashlight bike horder adjusted for the Boruit V15
100% заполнение ABS или PETG update ver.1.1 - убран пропил в звездочке для большей жесткости.
Mounting system for securing Dyson V11 or V15 under a shelf or bench with the wand and head still connected. Pole mount was printed at 20% infill with tree supports End mount was printed at 15% infill with no supports
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
My take on the Dyson accessory holder, as I had trouble with alternatives being incompatible with the powered accessories of the v15. Designed to be printed without supports. Should be a tight snap fit, but you might want to scale it up…
Reccomend printing in PETG with supports on the build-plate only. If the print fails, try printing each part seperately, and rotating the bottom 90 degrees on the x axis, printing the topscrew at the angle it comes in, and the handle as…
I tweaked the V11 Dyson attachment holder from @HopefulMonst_1088490 and made two new versions for the new V15 Dyson Vacuum: 11-port rack – extra spots depending on your needs 9-port rack – spots for every single attachment that ships…
Replacement Latch for the Dyson V15 Submarine's brush reservoir
CZ: Různých dílů k vysavači Dyson (například Dyson V15 detect absolute), zde seženete hodně. Tato pomůcka je unikátní protože zlepšuje čas sušení filtrů, které po čase je opláchnout a pak filtr schne 24 až 36 hodin. Hlavní kus tvoří…
Upfront, this is a replacement component (gasket) for a Dyson v15 vacuum. I cannot see how this would violate any laws because Dyson simply doesn't sell replacement gaskets for these systems…you have to buy an entirely new canister. If…
Helmet_Holder_v15_ONE_PIECE_Wall_Mount Custom organic supports. Designed for 3D Fuel PRO-PCTG material or PRUSAMENT PETG. Designed for this style ¼” shank wall anchor.…
I designed this shorter/slimmer wall mount for my VACTechPro V15 cordless vacuum cleaner as the included one was too long for where I wanted to hang it. I was able to hang it on a small piece of wall by my stairs, where the larger…
Designed to print without the need for supports (no overhangs steeper than 45 degrees) Slide the filter onto this, and hold the H2O port up to a bathroom or kitchen faucet with an aerator measuring a standard 21mm to clean the bottom…
Cooling and optic mounting for Fiber laser module Raycus 120W 16V15A - Adapter for Anet A6 3D printer Made in Autodesk Inventor (ipt file included)
This is a remix of an efficient trigger lock but without any screw. Just insert the trigger and plug the 2 parts on your V15 and it's done. No need glue. Perhaps you need to paper sans a little bit the clutch and the hole to insert the…
Simple C slip that can lock the trigger into an ON position, or be attached to the bottom half of the handle. The clip also has a place for a string loop if you need to hang this somewhere. Very simple & robust design, no moving parts, no…
T-spline Spiral Vase designed in fusion 360, print in the orientation of the model with no supports.
I just got a new vacuum, and it didn't come with enough mounts for the accessories. There are lots of options for mount models on Printables, but they are all designed to be screw mounted. I live in an apartment and would prefer to not…
A simple spacer if you need a bit more clearance to be able to store some of the tools. Need even more height? Simply scale up that Z in prusaslicer!
I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed.
I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed. It requires/was made to work with: https://www.prusaprinters.org/prints/151972-dyson-v7-v8-v10-v11-v15-vacuum-bag-adapter
After learning the basics of 3D design I decided to create this Dyson accessory adapter. I had previously made one by remixing an existing design, but it was a hash that I bundled together in PrusaSlicer. This time, I wanted to do it…
Adapter to clean with tab water without rinse the paper part of the filter with 22mm TPU adapter (is required!) feel free to ask for custom version with different diameter! . Adapter zum reinigen mit Leitungswasser Dyson V11 & V15…
A simple yet clean solution to store the multiple attachments you can use with a Dyson vacuum. Works for the small attachments up to the large mopping ones. Attaches to the wall with 2 screws. This mount allows you to snap in the…
Luftschacht Filter Mod für Dyson V11, V15 und weitere zum aufstecken, kein kleben notwendig . Designed in Germany - Thanks Freecad
Ideas and geometry from both @HopefulMonst_1088490 's original V10/V11 models and @awitten_2843089 's V15 remix with some printability changes and tweaks to ensure it fits on a 256mm bed and can print as one piece. This model has spots…
Dyson Vacuum Small Crevice Tool to sick on the built-in dusting & crevice tool of a V15 Detect.
Slightly shorter than the original to fit on my Prusa MK4 at 210mm height. Print standing vertically, consider adding a brim. I recommend using PETG or another material that is more flexible (fatigue-friendly), as the connector button…
Just corrected the messy geometry a bit
Libre à vous de changer l'orientation des pièces dans votre slicer résolution 0,20 et 0,15 remplissage 17% besoin de support
might still require a few tweaks, but works. Used hardware: battery contacts, wire, two small pieces of copper wire d=3mm as contacts. Print standing up with supports, fix the batteries in place using a rubber / velcro fastener.
This part was independently designed from scratch for repair and maintenance purposes and is intended as a 3D-printable replacement for damaged or worn hinge components. Features: Easy to print Designed for functional replacement use…
100% loose fit, scale to 101% for tight fit V1: Bottom 12x30mm, Top 5x25mm V2: Bottom 12x30mm, Top 4x30mm (longer, angled top and does not block side holes anymore) I printed v1 in PETG and spiral/vase mode (0,8mm nozzle).
This is a complete kit to build a 24V15Ah lithium ion battery using 21700 cells. It was generated with ease using my battery design software that you can find right here: https://howtobuildabattery.com/designer/
Decorative Mushroom – Nature-Inspired 3D Model Bring a touch of the forest into your home with this decorative mushroom model. Inspired by the elegant forms of real mushrooms, this design features smooth organic curves and a clean,…
It can be glued using cyanoacrylate, but I prefer UV glue for better control over the appearance of the joint. Printed in PLA with a 0.15mm layer height and supports.
Docking station for Dyson V11 and V15. Compatible with genuine charger connector, press fitted but might require glue as i have tested only one charger. Requires supports!
The model has holes on the bottom for m3x15 countersunk screws to attach the bottom plate, and 4mm countersunk holes to attach to a wall. The bottom piece can be printed on either side, top piece only from the flat face up. Supports are…
If you want to glue or double tape your Dyson dock to the wall these packers increase the surface area you have for adhesion. They can be glued in with superglue, the dock can then be fitted to the wall with liquid nails or mounting tape.…
I designed this to work with the ender 3 max print head while using a 60mm and a 40mm fan. As of now, this is the 15th version of the design, however, I can't say it's 100% finished (more like 90%). So far, my printer has been working…
A remix made to increase the inner diameter to 37.5mm, as my vacuum bags required that. The original unfortunately didn't work at all. Printed in PLA with “0.2mm QUALITY”-profile in Prusa Slicer, no supports needed and I didn't use any…
Voici un modèle de support mural pour vos accessoires Dyson V12 & V15. Le model nécessite des supports peints que vous trouverez en images dans la description.
NEW v100a CLASP up NOW!! Enjoy! New v100a files up now! I took a long enough break to finally have a new idea! I can now present a version that can't kink up but still moves like a chain! It's a little thicker/chunkier, but the profile is…
Bohužel jsem soubor omylem vymazal mám tedy jen gcode body2 . Možná do budoucna udělám nový , oba díly jsem slepil k sobě fungovalo to i bez lepení, ale takto nehrozí žádné odpojení.
Dyson v15 laser soft roller cover, My reproduction based on photos from the internet. Original one was lost. Probably good idea will be to add a bearing to hold the shaft from the main brush. The wheel please print in some flexible…
Dyson v12 (mini) soft roller mount adapter to be compatible with v8, v11, v15.
Remix of https://www.printables.com/model/151972-dyson-v7-v8-v10-v11-v15-vacuum-bag-adapter from Adrian Dobre Our old ETA Biggs, has 38mm inner diameter, I wanted to use the same accessories, This model is 37,8mm so filing needed. Which I…
So the hose that comes with the Dyson pet grooming kit uses the v6 attachment system, they give you an adapter to plug it into v8 and newer vacuums such as the v15, but no adapter is present to plug a v8 or later accessory into the hose.…
Added space for electrical connectors of some accesories
The parent model is great, but it did not quite fit certain tools that require a larger spacing from the wall. In this remix I remodeled in Fusion360 and added 10 mm depth from the wall to accommodate those pesky tools that wouldn't fit…
I wanted an adapter for Dyson accessories that would fit a dust extractor with a 35 mm hose. There wasn't one, so I remixed an existing model from Printables. I have a Dyson V7 but I believe the connections up to V15 are interchangeable…
Bonjour ! Ne trouvant pas bonheur dans les modèles déjà disponibles j'ai modélisé mon interprétation d'un support Mural pour accessoires Dyson V15 (V8 -> V12 inclus Détect) Design et rapide a imprimer, il permettras de ranger efficacement…
My own creation from inspiration of several models out there. I wanted something that would lock the trigger to an ‘on’ position yet allowed my finger to still use the trigger without significantly hindering its original operation. Also…
Originally designed to just be a spare battery dock but can be used as an additional dock for the vacuum as well. Part tested with ABS but should work printed in PETG. Recessed screws will be needed to ensure there is no interference with…
Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…
Makita DRV150 140J44-9 - FRONT HOUSING. RIGHT TO REPAIR. Got myself a broken Makita DRV150 and since it was looking brand new from outside i was wondering what was broken inside in it. Took it apart and noticed that the front housing case…
Assembly Instructions: Please refer to the attached PDF for a detailed visual guide on assembling the light attachment. You can download it from the ‘Other files’ section, rather than using the link provided by Prusa at the top of the…
Keychain Collection V15 20 different Keychains! Follow Please! My New Group: https://www.printables.com/de/group/3d-printer-group-for-epic-figures-eQ3qerR/comments
Dyson V15 accessory holders can be mounted on a vertical wall or under a shelf, allowing you to create your ideal cleaning station. You have the freedom to position your accessories vertically, horizontally, or at a 45-degree angle, all…
Replacement for the Dyson v15 wand clip. May work on other Dyson vacuums.
For those curious about adding LEDs to the Dyson V15 Vacuum Motorhead, I've documented my journey. It’s not a quick task and requires some soldering skills and patience. While I believe many might not venture into this, I've included…
I've created a simplified version of the Dyson V15 ShineOn accessory LED light, SpotON LED Light. I believe this is easy to build, so I’ve attached two files with pictures as a visual reference. You can download the PDFs from ‘Other…
Standard print settings although I advice against fuzzy skin, the walls are properly too close to each other so it might create a lot of stringing I printed it with 0.6 mm but it might be better with a 0.4 mm.
Stand with dish for drying the Dyson Submarine roller.
Based on @InqEnzo s great work: https://www.printables.com/model/257697-dyson-v11-attachment-holders Attachment holder optimized for Dyson V15s detect hair screw tool. Other tools will fit as well.
Drying rack for the wet roller brush bar of the Dyson V15s detect submarine
Dies ist ein Tool-Halter für Dyson's “Grab and Go Dok” (V11, V15). Der Halter wird einfach über das Rohr geschoben. Er kann so montiert werden, daß die Tools nach oben oder nach unten zeigen. Bei Bedarf können auch zwei dieser Halter…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: FootDia = 8 FootHeight = 10 Width = 180…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: FPanel = 1 PCBWidth = 50 TxtSize = 3 BPanel…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: txt = Length = 180 BPanel = 0 BShell = 1…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: PCBPosY = 6 PCBPosX = 7 Width = 180 Police =…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…
a small nozzle for Dyson V7, V8, V10, V11, V15
Installation Guide This model can be securely mounted to a wall using just one screw. For drywall installations, the use of a wall plug is advised. Thanks to its specially designed back, the model offers enhanced sturdiness against the…
While I actually re-designed this from scratch, I do credit Kasper Walczuk for the inspiration. You can clip several of these onto the long tube to keep all attachments together. V3 adds holes to accept Velcro (hook and loop) and…
Verlängern Sie die Lebensdauer Ihres Dyson Filters mit Leichtigkeit! Unser speziell entworfenes Teil passt perfekt zu Ihrem Dyson und ermöglicht es Ihnen, den Filter mit Leichtigkeit und Effizienz zu reinigen. Einfach den Filter…
Like Rilot's design, this model attaches to the lip below the trigger but leaves much more space for normal trigger operation. The lock can be flipped using a single finger allowing for one-handed operation and you can easily switch…
Prints nicely with standard 0.4 nozzle. I printed with 0.6 and draft quality for faster print times. Adaptive cubic infill at 15-20% is more than enough with 3 perimeters. With the extra room for the connectors, this should now fit all…
it has a mechanism to secure to ratcheting gear and to release the gear to unwind. no supports
Attention! it is not designed to support the weight of the dyson, but to support it standing with the brush resting on the floor...
This is the basic components of a 3D printed speaker; you need to add magnets and copper wire, Along with getting the plates cut from a local or online laser cutter The Surround should be printed in TPU or this speaker may not work. I…
Despite the impressive performance of Dyson vacuum cleaners, there is often a lack of dedicated storage for the included nozzles and attachments. My solution is simple, a wall mount that accommodates two of Dyson's nozzles simultaneously.…
I've designed this to use Dyson V11 Animal+ accessories with generic shop vac I have (which is powerful but came with almost no accessories) For dimensions refer to drawing. This adapter will fit all dyson accessories with the “clicky”…
![#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>](https://media.printables.com/media/prints/684679/images/5379109_2c2c8704-f14a-47c0-a640-2faee9f8204a_5ae8e719-2a4b-4ff5-a084-a3e50fdbeffe/rl-20231217-006.jpg)
