1 / 2
Geekvape Wenax S3 Cover in TPU - Vase Mode — zdjęcie 1
1 / 2

Geekvape Wenax S3 Cover in TPU - Vase Mode

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A TPU cover for the Wenax SC vape pen. Holes not included.

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
461
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A simple cover for the Wenax S3 , unfortunately the holes are not pre-cut since it has to be printed in vase mode with Overture High Speed TPU - Translucent Red.

Print as slow as you can. Use 0.94mm extrusion width for the external perimeter.

How to cut the holes:

  1. remove the pod from the vape pen;
  2. slide the cover on;
  3. trace the holes with a marker;
  4. remove the cover;
  5. warm up and allen key on your gas stove or with a lighter (WARNING: hold the allen key with a insulating material or you will get burned);
  6. use the allen key while still hot to melt through the cover (as shown in the picture);
  7. clean up the holes with a hobby knife.

Tagi