1 / 1
Exhaust Fans for Prusa Lack Enclosure v2 — zdjęcie 1

Exhaust Fans for Prusa Lack Enclosure v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed an exhaust fan system for the Prusa Lack Enclosure v2. This allows for printing PLA with the doors closed.

Ocena
0 / 5
Polubienia
47
Pobrania
120
Wydruki
1
Wyświetlenia
1966
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed an exhaust fan system for the Prusa Lack Enclosure v2. This allows for printing PLA with the enclosure doors closed.

I saw a noticeable improvement of 5-6C decrease in chamber temps, which allows me to print PLA without heat creep.

See my YouTube video for details on printing and assembly: https://youtu.be/DLanAatNyNQ

Material: PETG
Layer Height: 0.2mm
Infill: Gyroid @ 15%
Supports: None

Required Parts:
- 2 x Noctua PWM fans
- 2 x #10 x 3/4" bolts
- Cables with four wires, as long as needed for your setup

Tagi