camera support Skippy boat rc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I have created this model in Tinkercad for my "gopro" camera so I can make recordings in the water. The model needs an organic support / tree not the normal ones, the model has a hole to put the screw that holds the camera and on the other side the M5 nut, the hole is 5mm. There is also another hole underneath to hold the camera, that is 3mm thick and 9.5mm long (M3 screw at the bottom) if the screw is small and therefore does not hold well, I do is put a small piece of filament line that makes the printer to puergar and so is caught.
Materials:
1. The 3d support.
2. M5 screw that comes with the camera. 3.
3. M5 nut.
4. M3 screw and 8mm-9.5mm long.
Thanks :)