BMW Isetta 300, 600 Valve Cover Gasket from TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Valve cover gasket for BMW microcar from the 50's and 60's
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I found this gasket online from EBay for $2.50 + $30.00 shipping. Others in a gasket set for $40+. After checking TPU filament usage for gaskets I thought I would give it a try. what I found that TPU is quite resilient to liquids and oils. Temperature wise suggest not beyond 110C or 230F. I feel that would work as valve cover gasket.
I used Ziro TPU filament bought from Amazon. Creality Ender 3, 2.0 layer, 230C extrude temp. PEI plate at 60C, no retraction, 0.8 sides, 1.2 top and bottom, 20% infill, start extrusion around 30 moved to 50 about 40% to 50% into printing to reduce time, around 2 ½ hours. Turn 45 degrees on build plate for best printing. 2mm thick.
It fits fine but I still have aways before starting the engine for further testing. This is for a very select group and I hope someone can use it.