BMW Isetta 300, 600 Valve Cover Gasket from TPU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Valve cover gasket for BMW microcar from the 50's and 60's
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 1
- Views
- 202
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I found this gasket online from EBay for $2.50 + $30.00 shipping. Others in a gasket set for $40+. After checking TPU filament usage for gaskets I thought I would give it a try. what I found that TPU is quite resilient to liquids and oils. Temperature wise suggest not beyond 110C or 230F. I feel that would work as valve cover gasket.
I used Ziro TPU filament bought from Amazon. Creality Ender 3, 2.0 layer, 230C extrude temp. PEI plate at 60C, no retraction, 0.8 sides, 1.2 top and bottom, 20% infill, start extrusion around 30 moved to 50 about 40% to 50% into printing to reduce time, around 2 ½ hours. Turn 45 degrees on build plate for best printing. 2mm thick.
It fits fine but I still have aways before starting the engine for further testing. This is for a very select group and I hope someone can use it.