Heroic old Logo (CS2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heroic old Logo - easy multicolor print.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Heroic old Logo
Some think that Heroics old logo looked better than the new one. I will let you decide.
It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together.
Will recommend printing the parts upside down for a smoother finish.
If you choose to glue the parts together, then use a glue that do not dry that fast. Then it is easier to move the parts around in the beginning.
Update 01.08.24 Multicolor print added. I recommend printing the first layers in lower speed for better accuracy. The print is allready flipped upside down.
Any feedback would be greatly appreciated.