Organic design headset stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Headset stand unlike any others !
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 361
- Wydruki
- 0
- Wyświetlenia
- 1661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
While there are countless possibilities for headset stand designs, I noticed a lack of options that truly fit my needs. So, I took matters into my own hands and crafted this headset stand from scratch.
For the presented print: The Sennheiser Game Zero headset is approximately 20.5 cm, but when factoring in the cable, a length of around 24 cm is needed. I've included the Blender file in case your print fails around the 97% mark (it happened to me 😭), allowing you to slice only the remaining portion.
Printed at 0.30 mm layer height with 10% gyroid infill, this stand took just under 12 hours to complete. Don't forget to activate brims to minimize the risk of print failures.
I'd love to see how this stand looks with different headsets! Feel free to send in your pictures to showcase more examples.