Bumper for door magnets 60mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bumper to "deactivate" magnets that keep safety doors open. Doors close automatically after installation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bumper to "deactivate" magnets that keep safety doors open. Doors close automatically after installation without hampering with the mechanism. Used for temporary deactivation of the door magnet.
Designed for 60mm door magnets used in automatic escape route control systems.
Best printed in PETG as PLA is too brittle and will shatter quickly. Layer: 0.2-0.35mm (or more) recommended, 25% infill.
Disclaimer: Disabling a safety device is only permitted for properly qualified personnel and in precise circumstances. Check your local regulations before use. Don't leave installed for extended periods of time as it disables a safety installation. Use at own risk, author declines all liability.