Bumper for door magnets 60mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bumper to "deactivate" magnets that keep safety doors open. Doors close automatically after installation.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bumper to "deactivate" magnets that keep safety doors open. Doors close automatically after installation without hampering with the mechanism. Used for temporary deactivation of the door magnet.
Designed for 60mm door magnets used in automatic escape route control systems.
Best printed in PETG as PLA is too brittle and will shatter quickly. Layer: 0.2-0.35mm (or more) recommended, 25% infill.
Disclaimer: Disabling a safety device is only permitted for properly qualified personnel and in precise circumstances. Check your local regulations before use. Don't leave installed for extended periods of time as it disables a safety installation. Use at own risk, author declines all liability.