RC car chassis Fully customizable DESTINY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You could build it with any width (170-204mm) and with any wheelbase (235-300mm)
- Ocena
- 4,333 / 5
- Polubienia
- 174
- Pobrania
- 756
- Wydruki
- 3
- Wyświetlenia
- 6410
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Scale is 1:10
This chassis was designed to fit for any body in size length and width. The motor is located in the middle. Only the rear shafts are driven. There is a differential with a bewel gear with a 2,5 ratio. You could use bought parts from internet for example suspensions, differential, ballheads, etc… or simple print everything, so you can have the cheapest version. In this case you have to buy only the electronics, the motor, bearings, magnets and screws.
These files contains only this size:
Wheelbase: 273mm
Total Width: 185mm
If you need a fully custom chassis with specific dimensions, go check out our website:
https://www.mfactory33.com
Here you can download it (DESTINY) for free and you can find a video about the whole assembly and the partlist.