Kirigami Rose "Filament Painting"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge litography for filamentpainting. Size 10x15cm "Loving my content? Show some love with a thumbs up 👍❤!"
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 123
- Wydruki
- 8
- Wyświetlenia
- 1031
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Standard Digital File License
Kirigami rose .. picture generated by AI
There are several variants of colour combinations try also new and show us your colour combos :-)
#############################################################################
Red variant
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Red Transmission Distance: 5
PLA Aurapol Orange Transmission Distance: 4.4
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Red
At layer #22 (1mm) swap to Orange
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Ping/Yellow
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Orange/Yellow
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Aurapol Orange Transmission Distance: 4.4
PLA 3Dpower Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Orange
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Bluelagun
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Jamghe Blue Transmission Distance: 5
PLA JakobFilament Light Blue Transmission Distance: 3.2
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Blue
At layer #22 (1mm) swap to Light Blue
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Pink/white
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe White Transmission Distance: 5.2
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to White
At layer #34 (1.48mm) swap to White for the rest.
#############################################################################
"Loving my content? Show some love with a thumbs up 👍❤!"
Enjoy :-)