Kirigami Rose "Filament Painting"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge litography for filamentpainting. Size 10x15cm "Loving my content? Show some love with a thumbs up 👍❤!"
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 124
- Makes
- 8
- Views
- 1,039
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Kirigami rose .. picture generated by AI
There are several variants of colour combinations try also new and show us your colour combos :-)
#############################################################################
Red variant
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Red Transmission Distance: 5
PLA Aurapol Orange Transmission Distance: 4.4
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Red
At layer #22 (1mm) swap to Orange
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Ping/Yellow
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Orange/Yellow
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Aurapol Orange Transmission Distance: 4.4
PLA 3Dpower Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Orange
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Bluelagun
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Jamghe Blue Transmission Distance: 5
PLA JakobFilament Light Blue Transmission Distance: 3.2
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Blue
At layer #22 (1mm) swap to Light Blue
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Pink/white
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe White Transmission Distance: 5.2
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to White
At layer #34 (1.48mm) swap to White for the rest.
#############################################################################
"Loving my content? Show some love with a thumbs up 👍❤!"
Enjoy :-)