Counting matching models…
I recently read about a kirigami-inspired soft robotic gripper developed at North Carolina State University, and I wanted to create an FDM 3D-printable version to play with. The full article about how it works was published in Nature:…
UPDATED! these have all been made stiffer! Also please note that for the illustrative purposes the kirigami frame a brace are depicted upside-down. After running the LDO Kirigami Bed Kit and loving it for over a year I found only one…
Kirigami Bed Front with insertable Voron Logo.
This is pretty basic and probably has too many holes but it kinda works, so here it is. Tips for printing: I had better luck with flexible PLA than with TPU, mostly due to stringing. I'd really like to print it thinner, but I needed 3…
Inspired by this design , but with single 3010 for the popular kirigami bed. The model isn't pretty but it works well. It would be easier to center the fan but many people use wago connectors and this would not work so I shifted the fan…
So 3D Printy suggested somebody try to recreate an experiment he was reading about and wanted to see it printed on a MK4. I went to work and this was the result. Both STLs for printing and SVG files for cutting available. Print .2mm…
How to add THIS to ORCASLICER This one is mostly for FUN and to Show that SWEET Kirigami build plate setup in your slicer. First download the STL provided Open OrcaSlicer In the Printer section click on the “Printer Settings” button In…
Hi there! When printing with higher acceleration values on the V0.2 the bed will swing up and down. To fix this I designed this brace that will stiffen up the kirigami bed carrier. In addition for a simple mount you should also reprint…
there are two versions, hartk version with bushings (sexbolt_upper_mount, sexbolt_lower_mount, sexbolt_torso) v2.4 version with deflanged pulley (nozzle_probe_R1, R2, use sexbolt) auto z calibration should work with short klicky probe, on…
I printed the original design by MarekZCMB and then found that because I have the R1 version of the Z endstop mount, I would need to disassemble about half of the printer to replace it I decided to remix it as a cover only, no disassembly…
If it seems to you that the chain does not touch the vertical profile in the upper position, you can try replacing the part with a lower one. Compatible with - https://www.printables.com/model/407209-end-link-cable-chain-for-voron-v02
UPDATE: I noticed the Dragonburner was hitting the screen just slightly when at Y0. I added a little cutout to prevent that. I haven't printed this one yet as I like K Millers remix and may try that instead. Beware: the KNOMI 2 is 5v…
Inspired by the Research from Polytechnique Montréal presented here: https://www.youtube.com/watch?v=6rrDW6YIbXI
Unscrew the front of the Kirigami bed and install this. Shouldn't crash ADXL into bottom extrusion even when installed upside down. How to tune your printer with this model:…
Only 4 mm - this is the thickness of this table lamp when folded. I designed this lamp specifically so that when its light is not needed, the lamp does not take up space on the table and "disappears". Aluminum radiator plate for LED strip…
Bed spacer for the V0 Kirigami bed mod. Allows you to line the bed up to the front or rear of the frame.
Forward+2mm to prevent friction and compression of aluminum profiles
This is a modified FT EMS V2 cable duct cover for the Voron 0.2. This one accommodates the Kirigami UFO Frame PCB.
A bed fan that can be easily screwed under the Kirigami bed without having to dismantle the bed. Required parts: 1 x 3030 fan 4x BHCS M3x12 2x BHCS M3x12 or 16, alternatively also SHCS 1x M3 insert
The z-axis switch on my newly built LDO Voron 0.2 kit wasn't reliably activated during homing moves. I tried adjusting the location of the switch but couldn't find a location that delivered reliable homing. I also tried replacing the…
Use this on the V3 Kirigami bed to get the same Y offset as on the V2 and remove the back/forward wiggle which happens because there is not enough tension on the springs. It can also be used to fix the maximum offset of the V3 by putting…
I am really like how the GunplaMarks' frame looks but cannot design it by myself so just took his design and made some adjustments. Slightly changed the KNOMI frame to fit on Kirigami Bed without touching the lower extrusion, front door…
Description I liked the idea of a Kirigami bed brace with a fan mount. However, I have only a 40mm fan left and I also have the Formbot Kit which has no PCB or Wago mounts. So I designed my own. I used the model by driftrotor as…
Kirigami Bed Brace: 2x Wago+3010 Fan Configuration BOM: 2 off M3 x 10 (for fixing to the Nut Block) 4 off M3 x 6 (for fixing the Kirigami down the long sides) 4 off M3 x 14 (fan mounting)/2 off M3 x 14 & 2 off M3 x 16 (cable guide+fan…
See picture 2 for the adjusted Kirigami bed mount. I had it working with only 3 screws first, but made the last one possible without adding a M3 heat-insert. Just screw a M3x6 BHCS directly into the plastic. Please refer to the original…
Compatible with: V0 Kirigami Bed Salad Fork / Tri-Zero / Pandora's Box anything with an extrusion to attach it to Supports the Rainbow Barf Logo LED or a Neopixel Mini Button BOM Item Qty. M3x5x4 Heatset Insert 2 M3 Hex Nut 2 M3x6 BHCS 4…
I removed hole for screw which was triggering z endstop in V0.1. The hole is not necessary anymore and was making part prone to warping and harder to print.
I was struggling to get the chamber temps up in my Voron V0 and research led me to the use of bed fans to help circulate and distribute heat from the bed. There were not a lot of options for the Voron V0 with Kirigami bed so I decided to…
divided into two parts, the M2 screws are replaced by M2 self-tapping screws supports are needed
Description: This mod if for a rook 2020 printer designed by rolohaun, had a kirigami bed laying around and wanted to intall it in my new rook 2020 build but couldn't find any mods so I desinged one from scratch inspired by the rook…
Needed a Drag chain for my ROOK 2020, and remixed this one I have used it in other builds, and I worked flawlessly, Needed to be smaller and have more of a turn radius since it would be used for the y axis to house the heated bed wires,…
I prefer the look of the original Stealth Bumper than the one provided by LDO motors. It uses a LED diffuser mask to provide better light masking and also makes more contrast to the printed main body. You can print the mask in either the…
This mod will get MK2 update soon-ish. It'll require some extra HW and Z motor mount to be reprinted. Extra BOM: Kirigami bed 2x M3x5x4 heat inserts 4x M2x20mm screws 4x M3x8mm screws 2x M3 nuts 2x M2 4mm heat inserts or 2x M2 nuts (both…
This model is remix of Kirigami LDO Breakout Mount from LDO Motion. I use it together with original part to connect thermal fuse with wago terminals and also when using ac bed heater to distribute ground wire to build plate and kirigami…
The Bigtreetech EBB36 can bus board is normally intended to be used on the extruder. However it also fits pretty nicely into the cutout of the Kirigami sheet metal bed mount. This are two small support brackets that attach to two of the…
Automatic Z calibration on Voron 0.2! This is a mount for a nozzle wiper and touch microswitch that attaches to the Kirigami bed frame on Voron 0.2 printers. It allows to use the Klipper Z calibration plugin with 0.2 printers. The nozzle…
I combined the belt mount from MNK with the design and end stop screw mount from the original Kirigami Mount. Mounts with 3 M3 Headset inserts and 4 M3x6 screws. The fourth screw screws directly into plastic. (same as the mount from MNK).…
I fought with my bed binding for a long time before I figured out it was because the T-nut mounting screws had slid into the spring in the backlash nut. Downsides christophmuellerorg's original design is excellent. The extra space on the…
Modified to work with Mythoscale and Rook 2020 (non mk1) New version is avalible
Modded Rook 2020 MK1 Kirigami Bed - by Wight554 Wight_Adapter_Heat_Inserts is based off the original model adding. x2 - M3 x 5mm heat inserts, x2 - M3 x 6mm bolts BeltClip needs to be mirrored. CableChainTop creates clearance for the…
Before you print: Make sure you have enough space between the kirigami bracket and the bottom panel of the camber: Place your 5015 blower on the bottom panel Move the bed all the way down The blower should be able to move freely The…
Extrusion length same as the rest of your Z extrusions. x2 - Mgn9c, Length 50mm shorter than Z extrusions. x4 - M2 or M2.5 heat inserts x4 - M2 or M2.5 8mm SH x6 - M3 heat inserts x8 - M3x6mm BH x4 - M3x12mm - 16mm BH x2 - M3x8mm BH Only…
It originally started as a personal custom, but due to requests, I decided to share the design. This Kirigami front bumper is characterized by its simple surface configuration. Two designs are available, LED-compatible and…
I found the previous mounting brace at the back of the display prevented the mounting to the kirigami bed. I have adjust the hole spacing on the mount to align properly with kirigami as it was little off. No more brace either, its now a…
Kirigami rose .. picture generated by AI There are several variants of colour combinations try also new and show us your colour combos :-) ############################################################################# Red variant Print at…
🖼 Kirigami style Rose "Filament Painting" 🖼 ℹ Kirigami style rose generated by AI. Picure size 10x15cm 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm 🎨 Materials: PLA…
This bracket allows you to mount a 4010 or 4020 axial fan to the underside of the Kirigami Bed to improve the heat-up time of the chamber for the Voron V0 printers. The bracket has 2 integrated Wago 221-412 mounts to allow easier wiring…
The Kirigami frame that was included with my Formbot V0.2 kit was slightly thicker than specified, as also experienced by SrgntBallistic . This made it very difficult to install the Z nut block on the frame. After installation, the frame…
Please read before downloading: You will need to permanently modify a kirigami bed holder (voids waranty) Please use another design if you don't want to permanently modify your kirigami Stuff needed: Part Name Amount Required Printable?…
Remix of a great design, but that required M2.5 inserts. Now M2.5 bolts screw into ABS.
