Brace for Kirigami Bed Voron V0.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This brace will stiffen the kirigami bed to decrease the up and down swinging while printing with higher values for acc.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 153
- Makes
- 3
- Views
- 1,516
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Hi there!
When printing with higher acceleration values on the V0.2 the bed will swing up and down. To fix this I designed this brace that will stiffen up the kirigami bed carrier.
In addition for a simple mount you should also reprint the slightly modified stealth nut block.
The brace itself comes with 3 wago slots because my setup used them for connecting the bed. If you need another version please ask me, so that I can design and upload them.
The brace is mounted with 4x M3 brass inserts and screws. The holes are d=4mm. Besides them you just need screws for the nut block that are 5mm longer than the original ones.
Looking forward for your feedback =)