Brace for Kirigami Bed Voron V0.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This brace will stiffen the kirigami bed to decrease the up and down swinging while printing with higher values for acc.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 152
- Wydruki
- 3
- Wyświetlenia
- 1512
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Hi there!
When printing with higher acceleration values on the V0.2 the bed will swing up and down. To fix this I designed this brace that will stiffen up the kirigami bed carrier.
In addition for a simple mount you should also reprint the slightly modified stealth nut block.
The brace itself comes with 3 wago slots because my setup used them for connecting the bed. If you need another version please ask me, so that I can design and upload them.
The brace is mounted with 4x M3 brass inserts and screws. The holes are d=4mm. Besides them you just need screws for the nut block that are 5mm longer than the original ones.
Looking forward for your feedback =)